Skip to product information
1 of 5

Mebay 3 Phases Generator Controller Control Module DC70D With CANBUS DC70DR

Mebay 3 Phases Generator Controller Control Module DC70D With CANBUS DC70DR

Test before shippment, 1 year warranty, pay safe with PayPal.

Style
Regular price $146.00
Regular price Sale price $146.00
Sale Sold out
Shipping calculated at checkout.

This series controller is specialized for Diesel / Gasoline / Gas Genset Start, Stop, Parameters monitoring, faults-checking as well as data setting.

4.3inch colorful LCD screen display with brand new UI design is adapted in this controller that the relative failures can be displayed directly. All the parameters can be displayed by simulated indicators and words. Besides, LCD screen can display various faults in the same time that the genset will be stopped once it can’t work smoothly.

There are four Models under DC7xD MK2 series.

DC70D MK2: used for single machine automation. Start/Stop through remote start signal.

DC72D MK2: Based on DC70D MK2, it adds Mains monitoring and AMF (Mains/Generator automatic switching control), especially suitable for the automation system composed by mains and genset.

DC70DR MK2: Based on DC70D MK2, it adds RS485 port.

DC72DR MK2: Based on DC72D MK2, it adds RS485 port.

Main Features

  • Standard CAN communication port, built-in J1939 protocol, has matched more than 30 kinds of engines;
  • Various kinds of parameters display.
  • Input/output function, status can be shown directly.
  • More categories of surface setting.
  • Real time clock inside: preset time operate and auto maintenance is available. Genset working plan can be set as per week or month.
  • Three class protection countdown function, which can set the maintenance time or date.
  • The black box function can save the relevant parameters of the unit when the fault alarm occurs in real time, and it is convenient to find the cause of the fault.
  • Totally 7relay’s output, among which 5 relay output can be self-configurable, each relay can be set as max 50 functions, besides, there are 4 groups as non-contact terminals.
  • With 5 switchesinput, up to 40 functions optional;
  • 4sensor simulation input connectors,  the oil pressure sensor is compatible with voltage signal input, and various display units can be configured.
  • Battery charging control function,which can protect the battery according to battery voltage status.
  • Sensor can be self-defined by front face button or PC software.
  • Adapt to 3P4W,1P2W,2P3W(120V/240V,50/60HZ)
  • Various of crank conditions (RPM, Frequency, Oil Pressure) can be chosen.
  • Control Protection: Auto Start/Stop of genset, load transfer (ATS control) and perfect failure display and protection.
  • Standard water-proof rubber gasket. The waterproof can reach IP54
View full details

Send Inquiries