• AC Power Genset LCD Display 3 Phases ATS Controller Control Panel ATS330AC Dual Power Controller - XFH generator parts
  • AC Power Genset LCD Display 3 Phases ATS Controller Control Panel ATS330AC Dual Power Controller - XFH generator parts
  • AC Power Genset LCD Display 3 Phases ATS Controller Control Panel ATS330AC Dual Power Controller - XFH generator parts
  • AC Power Genset LCD Display 3 Phases ATS Controller Control Panel ATS330AC Dual Power Controller - XFH generator parts
  • AC Power Genset LCD Display 3 Phases ATS Controller Control Panel ATS330AC Dual Power Controller - XFH generator parts
  • AC Power Genset LCD Display 3 Phases ATS Controller Control Panel ATS330AC Dual Power Controller - XFH generator parts
1 7

AC Power Genset LCD Display 3 Phases ATS Controller Control Panel ATS330AC Dual Power Controller

AC Power Genset LCD Display 3 Phases ATS Controller Control Panel ATS330AC Dual Power Controller

اختبار قبل الشحن، ضمان لمدة عام، الدفع بأمان عبر PayPal. شحن مجاني إلى 63 دولة.

$79.00
$79.00
أُوكَازيُون نفذ
يتم احتساب الشحن عند الخروج.

The ATS330AC is a dual power automatic switching controller for mains and standby power switching applications, allowing automatic or manual control of ATS dual power switching. It can display 3 phases mains/generator voltage and frequency.

Parameter Display：

* S1 voltage * S1 Frequency * S1 Number of closing times * S2 Voltage * S2 Frequency * S2 Number of closing times * S1/S2 with power supply time * Switch Status * Work Mode * Real-time status

Main Features
* AC power supply
* The voltage and frequency of the mains and standby power supply can be displayed. * Automatic/Manual mode. * Suitable for various AC systems (3 phase 4-wires, single-phase 2-wire, and 2-phase 3-wire).
* Input/output function, status can be shown directly.
* Event log function * Acquisition and display of parameters such as voltage, frequency, etc. * Control Protection: Realize automatic ATS switching of generator sets, perfect fault display and protection functions.

Options
Parameters
Working voltage
AC 100V-260V(L1N1/L2N2)
S1/S2 Voltage Input
3P4W 100VAC-260VAC (ph-N)
MAX Accumulating Time
99999.9Hours (Min Store time:6min)
Closing S1/S2 output
250VAC/16 AMP Non-contact normally Open output
Double split output
250VAC/3 AMP Non-contact normally Open output
Remote start S2 output
30VDC/1 AMP Non-contact normally close output
Fire input
Fire input signal earth active
Closing feedback input
The Closing feedback signal is valid
Working condition
-25-65℃
Protection Level
IP65：when waterproof rubber gasket is added between controller and its panel
Insulation strength
Apply AC 2.2kV voltage between high voltage terminal and low voltage terminal; The leakage current is not more than 3mA within
1min.
Overall dimension
106mm*86mm*45mm
Panel cutout
78mm*66mm
عرض التفاصيل الكاملة

المجموعات

إرسال الاستفسارات