Generator DSE520A Auto Start Module DSE520 Genset Controller DSE520A

CONFIGURABLE INPUTS

Configurable inputs are available for:

• Low Oil Pressure
• High Engine Temperature
• Remote Start.

This allows the module to function with normally open or normally closed switches.

Four fully configurable auxiliary inputs are provided to give protection expansion.These can be selected to be indication, warning or shutdown inputs either immediate or held off during start up.

ALARM CHANNELS

Multiple alarm channels are provided to monitor the following:

• Under/Overspeed
• Charge Fail
• Emergency Stop
• Low oil pressure
• High engine temperature
• Fail to Start
• Fail to stop
• Loss of speed sensing
• Programmable inputs as selected

First up alarm is indicated by a flashing LED. Subsequent simultaneous alarms are displayed by a steady LED.

DC SUPPLY

CONTINUOUS VOLTAGE RATING
8 to 35 V Continuous.

CRANKING DROPOUTS
Able to survive 0 V for 50 mS,
providing supply was at least 10 V
before dropout and supply recovers
to 5V. This is achieved without the
need for internal batteries.

MAXIMUM OPERATING CURRENT
290 mA at 12 V. 210 mA at 24 V.

MAXIMUM STANDY CURRENT
50 mA at 12 V. 30 mA at 24 V.

CHARGE FAIL EXCITATION RANGE
0 V to 35 V

INPUTS

ALTERNATOR INPUT RANGE
15 - 300 V ac RMS

ALTERNATOR INPUT FREQUENCY
50 - 60 Hz at rated engine speed.
Magnetic Input Range:
0.5 V to +/- 70 V (Clamped by
transient suppressors)

MAGNETIC INPUT FREQUENCY
10Hz to 10,000 Hz