Перейти к информации о продукте
1 из 6

Auto Generator Controller 4.3 Inch Screen Silicon Surface Black and White Display DC60D DC60DR with RS485 Port

Auto Generator Controller 4.3 Inch Screen Silicon Surface Black and White Display DC60D DC60DR with RS485 Port

Test before shippment, 1 year warranty, pay safe with PayPal. Free Shipping to 63 countries.

Обычная цена $124.00
Обычная цена Цена со скидкой $124.00
Распродажа Продано
Стоимость доставки рассчитывается при оформлении заказа.

This series controller is specialized for Diesel / Gasoline / Gas Genset Start, Stop, Parameters monitoring, faults-checking as well as data setting.

4.3inch colorful LCD screen display with brand new UI design is adapted in this controller that the relative failures can be displayed directly. All the parameters can be displayed by simulated indicators and words. Besides, LCD screen can display various faults in the same time that the genset will be stopped once it can’t work smoothly.

There are four Models under DC6xD MK2 series.

DC60D MK2: used for single machine automation. Start/Stop through remote start signal.

DC62D MK2: Based on DC60D MK2, it adds Mains monitoring and AMF (Mains/Generator automatic switching control), especially suitable for the automation system composed by mains and genset.

DC60DR MK2: Based on DC60D MK2, it adds RS485 port.

DC62DR MK2: Based on DC62D MK2, it adds RS485 port.

Main Features

  • Real time clock inside: preset time operate and auto maintenance is available. Genset working plan can be set as per week or month.
  • The black box function can save the relevant parameters of the unit when the fault alarm occurs in real time, and it is convenient to find the cause of the fault.
  • Totally 6relay’s output, among which 4 relay output can be self-configurable, each relay can be set as max20 functions, besides, there are 3 groups as non-contact terminals.
  • With 5 switchesinput, up to 40 functions optional;
  • 3sensor simulation input connectors,  the oil pressure sensor is compatible with voltage signal input, and various display units can be configured.
  • Battery charging control function,which can protect the battery according to battery voltage status.
  • Sensor can be self-defined by front face button or PC software.
  • Adapt to 3P4W,1P2W,2P3W(120V/240V,50/60HZ)
  • Various of crank conditions (RPM, Frequency, Oil Pressure) can be chosen.
  • Control Protection: Auto Start/Stop of genset, load transfer (ATS control) and perfect failure display and protection.
  • Standard water-proof rubber gasket. The waterproof can reach IP54
  • Module design: All the connections are adapted with European connectors so that installation, connection, repair and replacement can be more easily.



Working voltage

DC8V---36V Continuous

Power consumption

Standby:24V:MAX 1W


Working:24V:MAX 5W

AC Voltage Input

1P2W 30VAC-276VAC (ph-N)


2P3W 30VAC-276VAC (ph-N)


3P4W 30VAC-276VAC (ph-N)

Rotate speed sensor Frequency


MAX Accumulating Time

99999.9Hours(Min Store time:6min)

Fuel Relay Output

Max 16Amp DC+VE Supply voltage

Start Relay Output

Max 16Amp DC+VE Supply voltage

Programmable Relay output 1

Max 5Amp DC+VE Supply voltage

Programmable Relay output 2

5AMP Non-contact normal open&normal close output

Просмотреть всю информацию

Send Inquiries