Verfügbarkeit für Abholungen konnte nicht geladen werden
EA16 Automatic Voltage Regulator AVR brushless generator excitation stabilizer high quality
1.EA16 Suitable Frequency 50/60 Hz 2.Soft Start Voltage Ramping 3.16 ADC Current Output 4.Can be used in Parallel Operation
< ±0.5% Regulation
Suitable for brushless type generator Sensing Input 170~510 VAC
Can be used in Parallel Operation
16 ADC Current Output
EA16 Suitable Frequency 50/60 Hz , EA16-400Hz Suitable Frequency 400 Hz
Soft Start Voltage Ramping
Load CT Current Compensation, Analogue Voltage Input
Model NO.
EA16
EA16-400Hz
Sensing Input
Voltage 170~510 VAC Single Phase 2 wire
Voltage 170~510 VAC Single Phase 2 wire
Frequency 50/60 Hz
Frequency 400 Hz
Power Output
Voltage 60~300 VAC Single Phase 2 wire Max. 90 VDC @ 240 VAC input
Voltage 60~300 VAC Single Phase 2 wire Max. 90 VDC @ 240 VAC input
Input
Current Continuous 16A, Intermittent 20A for 10 Sec. Resistance Min. 6Ω @ 35 VDC
Current Continuous 16A, Intermittent 20A for 10 Sec. Resistance Min. 6Ω @ 35 VDC
Voltage Regulation
< ±0.5% (with 4% engine governing)
< ±0.5% (with 4% engine governing)
Voltage Build-up
Residual volts at AVR terminal > 5 VAC
Residual volts at AVR terminal > 5 VAC
External Volts Adjustment
±5% with 2 KΩ 1 watt trimmer
±5% with 2 KΩ 1 watt trimmer
CT Current Compensation Input
1A or 5A (Selectable)
1A or 5A (Selectable)
Analogue Input
±5 VDC ±10% AC @ ±3 VDC
±5 VDC ±10% AC @ ±3 VDC
Unit Power Dissipation
Max. 10 watt
Max. 10 watt
Thermal Drift
0.03% per °C change in AVR ambient
0.03% per °C change in AVR ambient
Under Frequency Protection
55 Hz @ 60 Hz , 45 Hz @ 55 Hz (Adjustable)
320 Hz (Adjustable)
Environment
Operating Temperature : -40~70 °C Storage Temperature : -40~85 °C Relative Humidity : Maximum 95% Vibration : 3.3G @ 100~2 KHz
Operating Temperature : -40~70 °C Storage Temperature : -40~85 °C Relative Humidity : Maximum 95% Vibration : 3.3G @ 100~2 KHz
AVR Controls Functions
VOLT : Voltage Adjustment STAB : Stability Adjustment U/F : To Set the U/F* Knee Point (*U/F: Under Frequency Protection) DROOP : To Adjust Droop TRIM : Analogue Input Adjustment
VOLT : Voltage Adjustment STAB : Stability Adjustment U/F : To Set the U/F* Knee Point (*U/F: Under Frequency Protection) DROOP : To Adjust Droop TRIM : Analogue Input Adjustment